CartClamp–on current probes or “current clamps” enable you to measure currents without breaking the electric circuit. Current clamps are designed with jaws that can be opened, placed around the conductor and clamped closed to form a magnetic loop around the conductor.
Current clamps offer a safe, cost–effective, simple and accurate way to take current measurements.
Our range of current clamps can be used with Pico Oscilloscopes and Pico Data Loggers, as well all major brands of oscilloscope and multimeters.
PP218: 60 A AC/DC Current Clamp (4 mm)
This current clamp will measure both AC and DC currents in the range 10 mA to 60 A. Features include a selectable calibrated voltage output. Supplied with 4 mm (banana) plug type connectors.
Price £80·00
(approx US$132·00 / €96,80)
Low stock - order soon
PP264: 60 A AC/DC Current Clamp (BNC)
This improved version of the PP218 features superior shielding against interference and is terminated in a BNC connector allowing it to be connected directly to your PicoScope.
Price £99·00
(approx US$163·35 / €119,79)
In stock
| PP218/PP264 Current Clamp Specifications | |
|---|---|
| Range | 10 mA to 60 A AC/DC |
| AC frequency range | Up to 20 kHz |
| Maximum conductor size | 9 mm |
| Output connectors | 4 mm banana plugs (PP218), BNC (PP264) |
| Operating environment | 0 °C to 50 °C, 70% RH |
| User manuals |  |
TA138: 200 A AC Current Clamp (4 mm)
Not being powered by batteries this unpowered current clamp is ideally suited to applications where current consumption is being monitored over long periods of time. Supplied with 4 mm (banana) plug type connectors.
Price £40·00
(approx US$66·00 / €48,40)
In stock
| TA138 Current Clamp Specifications | |
|---|---|
| Range (1 mV/A) | 0.1 A to 200 A AC RMS |
| Accuracy | ±2%, ±0.5 A |
| Maximum output impedance | 1 kΩ |
| Maximum conductor size | 16 mm |
| Operating environment | 0 °C to 50 °C |
| Storage environment | -30 °C to 60 °C |
| Dimensions (W x L x D) | 111 x 50 x 33 mm (approx 4.3 x 1.9 x 1.3 in) |
| Weight | 129 g (approx 4.5 oz) |
| Standards | IEC1010-1 (1995); EN61010-1 (2001) Category II 600 V Category III 300 V |
| User manuals | |
TA011: 400 A AC Current Clamp (4 mm)
Not being powered by batteries this unpowered current clamp is ideally suited to applications where current consumption is being monitored over long periods of time. Supplied with 4 mm (banana) plug type connectors.
Price £50·00
(approx US$82·50 / €60,50)
In stock
| TA011 Current Clamp Specifications | |
|---|---|
| Range 1 mV/A 10 mV/A | 0.1 A to 400 A AC RMS 0 A to 400 A AC RMS |
| Accuracy | ±2%, ± 0.5 A |
| Output voltage 1 mV/A 10 mV/A | 1 mV AC per 1 A AC 1 mV AC per 0.1 A AC |
| Maximum output impedance | 45 Ω |
| Maximum conductor size | 28 mm |
| Output connectors | 4 mm banana plugs |
| Operating environment | 0 °C to 50 °C |
| Storage environment | -20 °C to 60 °C |
| Dimensions (W x L x D) | 64 x 143 x 30 mm (approx 2.5 x 5.6 x 1.1 in) |
| Weight | 185 g (approx 6.5 oz) |
PP179: 600 A AC/DC Current Clamp (4 mm)
This current clamp can measure currents up to 600 amps for both AC (up to 400 Hz) and DC currents. Features includes a low–battery indicator. Supplied with 4 mm (banana) plug type connectors.
Price £80·00
(approx US$132·00 / €96,80)
In stock
PP266: 600 A AC/DC Current Clamp (BNC)
This improved version of the PP179 features superior shielding against interference and is terminated in a BNC connector allowing it to be connected directly to your PicoScope.
Price £99·00
(approx US$163·35 / €119,79)
In stock
| PP179/PP266 Current Clamp Specifications | ||
|---|---|---|
| Accuracy | DC | 0 to 600 A ± (2% reading +2 A) |
| AC | 0 to 300 A ± (2% reading +2 A) | |
| AC/DC | 300 A to 500 A ± (3% reading +2 A) | |
| AC/DC | 500 A to 600 A ± (6% reading +2 A) | |
| AC frequency range | 50 Hz to 400 Hz | |
| Voltage output | 1 mV per 1 A (0 to 600 mV AC & DC) | |
| Max conductor size | 30 mm | |
| Output connectors | 4 mm banana plugs (PP179), BNC (PP266) | |
| Operating environment | 0 °C to 50 °C, 70% RH | |
PP253: 2000 A AC/DC Current Clamp (4 mm)
This current clamp is suitable for measuring currents of up to 2000 amps DC or 1500 amps AC. Supplied with 4 mm (banana) plug type connectors.
Price £99·00
(approx US$163·35 / €119,79)
In stock
| PP253 Current Clamp Specifications | |
|---|---|
| Range | 0 - 1500 A AC 0 - 2000 A DC |
| Output voltage | 1 mV per 1 A |
| AC Frequency Range | 50 Hz to 400 Hz |
| Output connectors | 4 mm banana plugs |
| User manuals | |
Share
Help