CartOur ergonomically designed passive oscilloscope probes are suitable for use with all major brands of oscilloscopes as well as the PicoScope range of USB Oscilloscopes.
Read our free guide: How to Tune x10 Oscilloscope Probes
MI007: 60 MHz Oscilloscope Probe x1/x10
This high quality, general purpose oscilloscope probe has a 60 MHz bandwidth. A two position slide switch allows attenuation of either x1 or x10 to be selected.
| MI007 Oscilloscope Probe Specifications | ||
|---|---|---|
| X1 | X10 | |
| Attenuation | 1:1 | 10:1 |
| Bandwidth | DC to 15 MHz | DC to 60 MHz |
| Rise time: | 23.3 ns | 5.8 ns |
| Input Resistance | 1 MΩ | 10 MΩ |
| Input Capacitance | 46 pF plus oscilloscope | Approx 15 pF |
| Working Voltage | 600 V DC incl Peak AC (derating with frequency) | |
| Cable Length | 1.2 m (approx 3 ft 11 in) | |
| User manuals |  | |
| Price | £15·00 In stock | |
TA132: 150 MHz Oscilloscope Probe x1/x10
This passive high–impedance scope probe has a 150 MHz bandwidth and high–frequency trimming. A two position slide switch allows attenuation of either x1 or x10 to be selected.
| TA132 Oscilloscope Probe Specifications | ||
|---|---|---|
| X1 | X10 | |
| Attenuation | 1:1 | 10:1 |
| Bandwidth | DC to 10 MHz | DC to 150 MHz |
| Rise time: | 35 ns | 2.33 ns |
| Input Resistance | 1 MΩ | 10 MΩ |
| Input Capacitance | 15 pF | |
| Working Voltage | 600 V DC incl Peak AC CAT II | |
| Cable Length | 1.2 m (approx 3 ft 11 in) | |
| User manuals | | |
| Price | £20·00 In stock | |
TA131: 250 MHz Oscilloscope Probe x1/x10
This passive high–impedance scope probe has a 250 MHz bandwidth and high–frequency trimming. A two position slide switch allows attenuation of either x1 or x10 to be selected.
| TA131 Oscilloscope Probe Specifications | ||
|---|---|---|
| X1 | X10 | |
| Attenuation | 1:1 | 10:1 |
| Bandwidth | DC to 10 MHz | DC to 250 MHz |
| Rise time: | 35 ns | 1.4 ns |
| Input Resistance | 1 MΩ | 10 MΩ |
| Input Capacitance | 11 pF | |
| Working Voltage | 600 V DC incl Peak AC CAT II | |
| Cable Length | 1.2 m (approx 3 ft 11 in) | |
| User manuals | | |
| Price | £25·00 In stock | |
TA049: 500 MHz Oscilloscope Probe x10
The TA049 is a passive high–impedance oscilloscope probe designed and calibrated for use on instruments having an input impedance of 1 MΩ shunted by 15 pF. However, it may be compensated for use with instruments having an input capacitance of 10 to 35 pF. The probe has a further three trimmers for high–frequency compensation adjustment.
| TA049 Oscilloscope Probe Specifications | |
|---|---|
| Bandwidth | DC to 500 MHz |
| Attenuation | x10 |
| Rise time | 0.7 ns |
| Input resistance | 10 MΩ (when used with oscilloscopes with 1 MΩ input) |
| Input capacitance | Approximately 11 pF |
| Compensation range | 10 to 35 pF |
| Working voltage | Maximum 600 V (DC + Peak AC) |
| Safety | Conforms to IEC-1010 |
| Cable length | 1.5 m (approx 5 ft) |
| Weight | 146 g (approx 5.2 oz) including accessories and wallet |
| Operating environment | 0 °C to +50 °C, 80% RH |
| Storage environment | 0 °C to +50 °C, 80% RH |
| User manuals | |
| Price | £45·00 In stock |
TA101: 500 MHz Oscilloscope Probe x10
The TA101 500 MHz passive scope probe features x10 attenuation and a maximum working voltage of 300 volts RMS.
The compact design of this high–performance probe means there is only 2.5 mm housing diameter at the probe tip — compared to the conventional 5 mm housing — making it easier for you to see the device under test, and making it ideal for measurements of SMT components.
The TA101 is supplied with the following accessories and spares:
- 1 x Coding rings (set) 3x4 colours
- 1 x Ground blade 2.5
- 1 x Ground lead 15 cm
- 1 x Ground spring 2.5
- 1 x IC-Cap 2.5 0.5 mm pitch; green
- 1 x IC-Cap 2.5 0.65 mm pitch; blue
- 1 x IC Cap 2.5 0.8 mm pitch; grey
- 1 x IC Cap 2.5 1.0 mm pitch; brown
- 1 x IC Cap 2.5 1.27 mm pitch; black
- 1 x Insulating cap 2.5
- 2 x Self-adhesive Cu pad 2 x 2 cm
- 1 x Solid tip CuBe 0.5 mm
- 1 x Spring tip gold plated 0.5 mm
- 1 x Sprung hook 2.5
See below for further accessories and spares for the TA101
| TA101 Oscilloscope Probe Specifications | |
|---|---|
| Bandwidth | DC to 500 MHz |
| Attenuation | x10 |
| Input resistance | 10 MΩ |
| Input capacitance | < 9.5 pF |
| Maximum working voltage | 300 V RMS CAT II |
| Cable length | 1.3 m (approximately 4 ft 3 in) |
| User manuals | |
| Price | |
TA061 / TA062 : 1.5 GHz Oscilloscope Probe x10
Features:
- Small size: 2.5 mm diameter at the probe tip
- New IC contact system for 0.5 to 1.27 mm pitch
- Interchangeable spring contact tip
- Ideal for measurements of SMT components
- Coaxial design
- Low input capacitance
- Choice of SMA or BNC connector
| TA061 Specifications | ||
|---|---|---|
| Model | TA061 | TA062 |
| Connector type | SMA | BNC |
| Attenuation | 10:1 | |
| Input resistance | 500 Ω | |
| Input capacitance | 2 pF | |
| Input coupling of the measuring instrument | 50 Ω | |
| System bandwidth (-3 dB) | 1.5 GHz | |
| Risetime (10% - 90%) | 240 ps | |
| Rated voltage | 12 V DC incl AC pk | |
| Cable length | 1.3 m (approx 4 ft 3 in) | |
| Weight (probe only) | 48 g (approx 1.7 oz) | |
| Operating temperature | 0 °C to +50 °C | |
| Storage temperature | -40 °C to +71 °C | |
| User manuals | | |
| Price | £199·00 In stock | £199·00 Low stock - order soon |
A range of kits containing accessories and spare parts for the TA061 and TA062 are available (TA065 to TA076 are also suitable for use with the TA101).
| TA064 spring contact tips | TA065 advanced accessory kit | TA066 basic accessory kit | TA067 standard accessory kit | TA068 solid probe tips | |
|---|---|---|---|---|---|
| Coding rings (set) 3x4 colours | 1 | ||||
| Ground blade 2.5 | 1 | ||||
| Ground lead 15 cm | 1 | 1 | 1 | ||
| Ground spring 2.5 | 1 | ||||
| IC-Cap 2.5 0.5 mm pitch; green | 1 | ||||
| IC-Cap 2.5 0.65 mm pitch; blue | 1 | ||||
| IC Cap 2.5 0.8 mm pitch; grey | 1 | ||||
| IC Cap 2.5 1.0 mm pitch; brown | 1 | ||||
| IC Cap 2.5 1.27 mm pitch; black | 1 | ||||
| Insulating cap 2.5 | 1 | 1 | |||
| PCB adapter kit 2.5 | 1 | 1 | |||
| Self–adhesive Cu pad 2 x 2 cm | 2 | ||||
| Solid tip CuBe 0.5 mm | 1 | 1 | 1 | 5 | |
| Spring tip gold plated 0.5 mm | 5 | 1 | 1 | 1 | |
| Sprung hook 2.5 | 1 | 1 | 1 | ||
| BNC adapter | 1 | 1 | |||
| Price * US Dollar and Euro prices are approximate. | £19·80 In stock | £39·60 In stock | £12·60 Low stock - order soon | £21·10 Low stock - order soon | £6·60 In stock |
Share
Help
